Technical Features

Specification:

Table top model durable chamber for long life for several years.
Double layered mild steel body with anti-corrosion coating and air gap to maintain outer body temperature below 65 deg cel.
Inner wall of the furnace made of high density ceramic fibre.
Forward swing type insulated solid hinged door with provision for Insert gas intake point, manually operated front side of the furnace.
Working chamber with zero air, Nitrogen, Argon environment without damaging the heating element.
Energy efficient ceramic fibre insulation suitable for a maximum operating temperature of 1150°C and thermal conductivity.
Thermal insulated chamber & door with Ultra high purity alumina low thermal mass insulation.
All other sides lined using low thermal mass, high duty, high temperature resistant special grade Zirconia blended Alumina content Ceramic Fiber Blankets. Insulation save maximum energy and give good mechanical stability.
Thermocouple: K-type.
Heating Element Made up of best quality super grade Kenthal “A1” fitted on the top, left and right side of the chamber for better temperature control, Heating elements on support tubes to ensure free heat radiation and a long service life.
Unit can continuously run up to 99 hrs.
Safety interlock switch automatically interrupts power to heating element when door is opened.
Motorized Fan Forced Air Circulation for Transformer, Adjustable air inlet integrated in door, Natural heat distribution type.
Micro switch that disconnects the power of the heater element when the door is open.
Separate Air vent facilities air outlet in rear wall of furnace.
Removable panels for easy access to replace heating elements and thermocouples.
Safety device for thermocouple breaking & door switch will function to stop power supply when door of the furnace opened.
Heating elements on support tubes to ensure free heat radiation and a long service life
Power Controller Solid State Thyristor with low noise operation, Quality gears from reputed brands Power Control Solid State Thyristor.
Temperature 1100°C and continuous operating Temp. of the furnace up to 1050°C, Attainment of highest temperature in 90 minutes.
Fitted with thermocouple & silver fuse for protection of chamber.
Temperature is controlled by energy regulator with display of temperature on pyrometer fitted on panel with an accuracy of ±2%.
Resistant from most corrosive agent and can be used in atmosphere including air, N2 and Argon
PID controlled microprocessor based with LED display with Storage facilities for min 30 programmes with min. 40 segments.
As standard microprocessor based PID temperature controller; in addition, This includes programmable profile temperature controller having 30 programmes with more than 40 segments for ramp rate and soak time. These controllers feature excellent accuracy during the entire cycle and also keep displaying set value (SV) and process value (PV).
Interface with computer for data transfer facilities by RS232 connectivity.
Provision of Audio and Visual alarm in such cases and if needed, the system automatic cut-off mechanism in case of short circuit/electrical faults.
Supplied with cord and plug.
Indian conditions: 220V/50Hz